ANY REPAIR!

Shocks and Struts Repair Cleveland

Book an appointment at www.thelandautorepair.com or call 855-253-2886

Repairing shocks, also known as shock absorbers or dampers, can be challenging and potentially dangerous if not done correctly. Here’s a general guide on how to repair shocks:

  1. Diagnosis: Before attempting any repair, diagnose the problem with your shocks. Common symptoms of shock problems include excessive bouncing, uneven tire wear, and a rough or bumpy ride.
  2. Inspect the Shocks: Visually inspect the shocks for leaks, damage, or signs of wear. Leaking hydraulic fluid is a clear indication that the shock absorber is damaged and needs to be repaired or replaced.
  3. Test the Shocks: Perform a bounce test by pushing down on each corner of the vehicle and releasing. The vehicle should rebound smoothly and come to rest without excessive bouncing. If it continues to bounce or oscillate, the shocks may be worn out or damaged.
  4. Replacement Parts: Depending on the severity of the damage, you may need to replace certain components of the shock absorber. Common replacement parts include bushings, seals, and mounting hardware.
  5. Disassembly: If you’re comfortable working with automotive suspension systems, you can disassemble the shock absorbers to inspect the internal components. This may require specialized tools and knowledge of suspension systems.
  6. Cleaning and Inspection: Once disassembled, clean all parts thoroughly and inspect them for wear, damage, or signs of corrosion. Pay close attention to the piston, seals, and bushings, as these are common areas of failure.
  7. Replacement of Components: Replace any worn or damaged components with new ones. Be sure to use parts that are compatible with your vehicle’s make and model.
  8. Reassembly: Carefully reassemble the shock absorbers, ensuring that all parts are properly aligned and tightened to the manufacturer’s specifications. Use a torque wrench to tighten fasteners to the correct torque settings.
  9. Installation: Install the repaired shock absorbers back onto the vehicle, following the manufacturer’s instructions and recommendations. Be sure to properly support the vehicle and use jack stands to prevent accidents.
  10. Testing: After installation, test the vehicle to ensure that the shocks are functioning correctly. Take the vehicle for a test drive on various road surfaces to evaluate the ride quality and handling.
  11. Professional Help: If you’re not comfortable repairing shocks yourself, or if the damage is extensive, it’s best to seek help from a qualified mechanic or automotive technician. They have the tools, knowledge, and experience to properly diagnose and repair shock absorber issues.

Remember, shocks are critical components of your vehicle’s suspension system, so it’s important to ensure they are in good working condition for optimal safety and performance.

Book an appointment at www.thelandautorepair.com or call 855-253-2886

shock and strut repair Cleveland, shock and strut repair cost cleveland

Leave a Comment

Your email address will not be published. Required fields are marked *